Marcy Compact Dumbbell Rack

This is not meant for large weights.... it is more suited for the cute, little, brightly colored, very light weights. There is not enough clearance between the weights on the side slots if you put anything larger than 15 LBs on the side. Note in the picture I had to leave a side slot empty because the weights would interfere. And putting the larger weights on the sides encroaches on the middle section and that limits what you can put in the middle. That said, I did get all my weights on the rack, but it is not efficient.Also note (second picture) that the powder coat comes off very very easily if you have weights with the knurled grips. This picture is after I set the weights on once. I assume that my hands will be black for a few times until all the powder coat is scraped off. I hope the rack does not rust. I might put black duct tape on the rails to limit the scratching. Not sure what I could do on the side slots.There is not a lot of room for your fingers when replacing the weights on the rack - watch out for pinched fingers.Overall the rack is easy to assemble and seems sturdy.I'll post more after a few weeks of use. Hope this review was helpful!