Power on: Put the scale at vertical position without weight in hook bulk, press ON/OFF key, two seconds later, the screen will display (0 lb or 0.000kg or 0 g or oz), the scale will be ready for weight.
Tare/zero: Put the container on hook when the weighting bulk goods, press " tare " key, put the goods to the container, the screen will dispaly the weight of the goods only after finishing.
Hold function: Weight data is stable, this data will be auto lock and “ hold " sign appearing on the screen. Press “on/off" key again to weight new objects.
Weighting: Hook the goods after the scale is ready. Display the weight of the goods immediately, when the hook goodsare stable (on waving), the data will be lock and the screen will display “ hold " sign. Once you press “on/off "key to remove. During weighting, the total weight of goods (include container) can’t be over the max capacity, exceed this data, the sereen will display “O-Ld” and the buzzer will warn when it is overload.
Unit slection: Press “unit" key to select the unit, the unit could be selected among kg,g,lb,oz.
Locking function of weight: Long press the “tare" key after power-on, the LCD screen will display L-On, which is stand for openingthe locking function. During weighting, weight have locking function and appeare the “hold" sign.If you open the locking function, long press "tare” key, the LCD will display “L-OF”. Close the function of locking immediately.
Power-off: Press "on/off” key to turn off under weighting (without hold )mode, press “ on/off " key clear the“hold ” sign, and press “ on/off " key again to turn off under the “ hold " mode. the scale will auto turn off in 60 seconds if there is no operation.
The backlight function: When the backlight is on, if no button is pressed or there is no change in weight for approximately 15 seconds, the backlight will turn off. Pressing any button or a sudden change in weight will trigger the backlight to turn on again.
When the screen appears the sign "battery", it means the bateries are exhausted and need be replaced. remove the batteries to avoid leakage and damage to the circuits if the scal is mot used for a long time.
When the weight exceeds the capacity, " Err " will be displayed to indicate overload. In this case, immediately remove the item and reduce the weight before weighing again. Continuous overload may cause irreversible damage to the product.
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
