Features
For years, the fixie and single-speed bike market was dominated by heavy, unreliable, all-flash bikes which lowered standards and proved sluggish and difficult to ride. The RapidCycle Evolve surpasses expectations of fixed-gear road bike performance, so light you can lift it with two fingers and designed with best-in-class aerodynamics and riding experience in mind.
- Extremely lightweight
Easily liftable with two fingers - Aircraft-Grade 7005 Alloy Frame & Fork
Rust-Resistant
Stable, & Agile - Pre-Wrapped Bullhorn Bars
Switch between a variety of riding positions - Adjustable Seat Height
- Flip-Flop hub
Easily switch between fixed-gear & single-speed riding - Aerodynamic Geometry
- Hydroformed & Double-Butted Frame
Ensures maximum strength, responsiveness & reliability - Assembly required
From the manufacturer:
Bikes may need fine-tuning of brakes, gears or both coming straight out from the box, as brake calipers are disassembled.
Lifetime warranty for frame and fork according to RapidCycle's warranty terms and policies. Not applicable to misuse and accidents nor adjustment/tuning problems. (http://www.rapidcyc.com/warranty/)
Any returns are to be made directly to RapidCycle (1245 S. Hope Street, Los Angeles, CA 90015) at customer's cost in original and proper packaging within seven days from purchase for a full refund or replacement. Customers should send in an email to returns@rapidcyc.com prior to returning and refunds will be made by RapidCycle directly to customers.
Shipping Note: Due to the size of this item, shipping to Alaska, Hawaii, post office boxes or APO addresses is not available. A physical street address and phone number are required to schedule a delivery appointment to the first point of cover (e.g. patio, garage).
Warranty: Limited Lifetime Rapid Cycles (Frame & Fork)
Specs
Frame | 7005 Aluminum Alloy (Hydroform/Double Butted) |
Fork | 7005 Aluminum Alloy (Hydroform) |
Headset | 1 1/8″ Alloy |
Handlebars | Alloy Flatbar 480mm |
Stem | 28.6/90mm, 10 degree |
Seatpost | 30.4mm/300mm |
Crankset | Prowheel PRO-846P: 1/2″ x 1/8″, 46T, 170mm |
Bottom Bracket | 68 x 103mm sealed cartridge |
Chain | KMC Z410: 1/2″ x 1/8″ x 96L |
Brake Lever | Power Brake Lever: MBL-308PA |
Brake Caliper | Power Brake Caliper: CBR-3100 |
Wheels | 700x40mm Race Wheelset |
Front Hub | Alloy Sealed Cartridge Bearings 100mm |
Rear Hub | Alloy Sealed Cartridge Bearings 120mm 17T/18T |
Tires | CST 700x23mm |
Tubes | CST 700x23mm |
In the box:
(1) RapidCycle Evolve Bullhorn Fixed-Gear Bike
Specs
Frame | 7005 Aluminum Alloy (Hydroform/Double Butted) |
Fork | 7005 Aluminum Alloy (Hydroform) |
Headset | 1 1/8″ Alloy |
Handlebars | Alloy Flatbar 480mm |
Stem | 28.6/90mm, 10 degree |
Seatpost | 30.4mm/300mm |
Crankset | Prowheel PRO-846P: 1/2″ x 1/8″, 46T, 170mm |
Bottom Bracket | 68 x 103mm sealed cartridge |
Chain | KMC Z410: 1/2″ x 1/8″ x 96L |
Brake Lever | Power Brake Lever: MBL-308PA |
Brake Caliper | Power Brake Caliper: CBR-3100 |
Wheels | 700x40mm Race Wheelset |
Front Hub | Alloy Sealed Cartridge Bearings 100mm |
Rear Hub | Alloy Sealed Cartridge Bearings 120mm 17T/18T |
Tires | CST 700x23mm |
Tubes | CST 700x23mm |
In the box:
(1) RapidCycle Evolve Bullhorn Fixed-Gear Bike