The Belleville F630 ST Maintainer USAF Womens Hot Weather Steel Toe Boot is constructed of sage green leather suede and CORDURA nylon fabric for maximum durability. These boots feature Belleville's patented VANGUARD® Soling Sole for the comfort of a running shoe. The Belleville F630 ST features steel toe for foot safety and is rated for electrical hazard environments. This boot is designed for top performance in diverse and rugged terrain. The Belleville F630 ST Maintainer USAF Womens Hot Weather Steel Toe Boot is U.S. Air Force ABU Uniform Approved.
- Smooth, stain resistant full grain cowhide leather & nylon fabric upper
- Steel toe is ASTM F2412-11 and F2413-11 certified and EH rated
- Abrasion resisting MeraMax heel and toe overlays to mitigate cuts and scuffs to extend life of boot
- VANGUARD sole construction combining a cushioned polyurethane midsole
- 100% rubber VIBRAM Nav-Air outsole developed specifically for enhanced slip resistance
Warranty: 90 Day Woot Limited Warranty
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Specs
Sizing
All of our boots are available in Men’s Regular (R) and Wide (W) Widths, with some styles offering Narrow (N) and Extra Wide (XW) widths as well. Since sizes & widths vary among boot styles, please check individual boot styles for available sizes & widths.
Standard Width
|
Belleville Width
|
|
B
|
Narrow (N)
|
|
D
|
Regular (R)
|
|
EE
|
Wide (W)
|
|
EEEE
|
Extra Wide (XW)
|
Unfortunately, not all boot brands fit the same. For this reason, we would like to offer a few sizing tips that will help you get a better BELLEVILLE fit:
-
-
CHECK YOUR SIZE:
Belleville boots are about 1 to 1½ full sizes larger in fit than your normal shoe size when measuring on a standard Brannock shoe device. The difference depends on the type of boot you choose: soft toe versus safety toe, hot weather versus insulated or waterproof, etc.
-
SIZING RECOMMENDATIONS FOR THE MINI-MIL (TR101, TR102, TR103) MINIMALIST BOOTS:
Due to the wider shape of the toe box, we have found that the MINI-MiL® tends to run on the small/short side. For this reason, we recommend customers order a half size up from your normal shoe size. For instance, if you wear a size 10, then we would recommend you order a 10.5 in the MINI-MiL®.
-
GET SOME BOOT SOCKS:
Try on the boots with a pair of boot socks that you will normally wear with the boots.
-
PLACE & LACE:
It is important that your foot is properly placed inside the boots when selecting a size. Proper foot placement requires that the lace is drawn snug at the bottom of the lacing system. This will prevent your foot from sliding forward too far and keep your heel properly placed against the back of the boot. To improve the fit of the boot, try loosening or tightening the laces at different parts of the boot until you get the perfect fit.
-
CHECK THE LENGTH:
Length-wise, when your heel is placed against the back of the boot, you should have a slight amount of room in the front of the boots to wiggle your toes.
-
CHECK THE WIDTH:
Width-wise, your boots should feel a little snug, but not tight.
-
TAKE A STROLL:
Walk around to see how the boots feel. Make sure your heel stays in place and not sliding up and down (this can cause blisters).
WOMEN’S SIZES
Belleville does offer many boot styles that are specifically manufactured for women. All Belleville style numbers that begin with an “F” indicate a boot specifically designed and sized for women. If a particular style of boot is not available in women’s sizes, we recommend ordering the boot 2 full sizes smaller.
In the Box:
- (1) Belleville Women's USAF Maintainer Boot
