Belleville sets the standard in military footwear by always integrating new materials and technologies into their products. The Belleville 610 Z Hot Weather Tactical Side Zip Boots features Belleville's Meramax lightweight midsole, a weight-saving design that doesn't sacrifice any comfort and attenuates shock on your joints. These are the type of comfort boots that you'll be thankful for at the end of long duty shifts. This boot is unlined and has dual instep air vents to circulate airflow and keep your feet dry and cool in hot weather conditions. For speed and convenience, a side zipper provides easy wear and removal of your boots, ideal for soldiers that have to put on and remove their boots often. A heavily padded tongue and collar adds additional comfort. It's one of the lightest tactical style boots on the market - and thanks to the unique running shoe design, it's also one of the most comfortable. Best of all, it's Air Force ABU approved and proudly made in the USA.
- Shock Absorbent MeraMax dual density all polyurethane sole system to provide longer wear and increased traction.
- Zipper Boots offer the YKK coil zipper & Steel Toe Models meet ASTM F2412-05 and F2413-05 Standards.
- U.S. Air Force Uniform Approved
- Height 8" & Stylish, Tactical Design
- Vents for Draining and Cooling & Padded Tongue and Collar for extra comfort.
Warranty: 90 Day Woot Limited Warranty
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Specs
Sizing
All of our boots are available in Men’s Regular (R) and Wide (W) Widths, with some styles offering Narrow (N) and Extra Wide (XW) widths as well. Since sizes & widths vary among boot styles, please check individual boot styles for available sizes & widths.
Standard Width
|
Belleville Width
|
|
B
|
Narrow (N)
|
|
D
|
Regular (R)
|
|
EE
|
Wide (W)
|
|
EEEE
|
Extra Wide (XW)
|
Unfortunately, not all boot brands fit the same. For this reason, we would like to offer a few sizing tips that will help you get a better BELLEVILLE fit:
-
-
CHECK YOUR SIZE:
Belleville boots are about 1 to 1½ full sizes larger in fit than your normal shoe size when measuring on a standard Brannock shoe device. The difference depends on the type of boot you choose: soft toe versus safety toe, hot weather versus insulated or waterproof, etc.
-
SIZING RECOMMENDATIONS FOR THE MINI-MIL (TR101, TR102, TR103) MINIMALIST BOOTS:
Due to the wider shape of the toe box, we have found that the MINI-MiL® tends to run on the small/short side. For this reason, we recommend customers order a half size up from your normal shoe size. For instance, if you wear a size 10, then we would recommend you order a 10.5 in the MINI-MiL®.
-
GET SOME BOOT SOCKS:
Try on the boots with a pair of boot socks that you will normally wear with the boots.
-
PLACE & LACE:
It is important that your foot is properly placed inside the boots when selecting a size. Proper foot placement requires that the lace is drawn snug at the bottom of the lacing system. This will prevent your foot from sliding forward too far and keep your heel properly placed against the back of the boot. To improve the fit of the boot, try loosening or tightening the laces at different parts of the boot until you get the perfect fit.
-
CHECK THE LENGTH:
Length-wise, when your heel is placed against the back of the boot, you should have a slight amount of room in the front of the boots to wiggle your toes.
-
CHECK THE WIDTH:
Width-wise, your boots should feel a little snug, but not tight.
-
TAKE A STROLL:
Walk around to see how the boots feel. Make sure your heel stays in place and not sliding up and down (this can cause blisters).
WOMEN’S SIZES
Belleville does offer many boot styles that are specifically manufactured for women. All Belleville style numbers that begin with an “F” indicate a boot specifically designed and sized for women. If a particular style of boot is not available in women’s sizes, we recommend ordering the boot 2 full sizes smaller.
In the Box:
- (1) Belleville Air Force Side Zipper Boots
